5 Maintenance Tips for Your Garage Roller Doors

Maintenance and preventative care will keep your garage roller door safe and functional for many years. By staying on top of the maintenance, you can identify and fix the problem before they cause any personal injury or property damage. Your garage roller door requires maintenance if it shudders when opening, opens slowly, stops halfway down, won't open even when the motor is still running or has gaps between the ground and the base of the door. Here are 5 maintenance tips for your garage roller door. 

Lubricate the Moving Parts

A little lubrication can go a long way into preventing noise and keep the door in optimum operation. Use a spray lubricant to grease up the door opener's chain or the drive screw. It's a great idea to lubricate the rollers, tracks and hinges. 

Test the Door's Balance 

If your garage roller door is not balanced properly, the opener will need to work harder every time you close and open the door, which means that it won't last for long before breaking down. To confirm that the door is properly balanced, just disconnect the opener by pulling on the release handle. Open or lower the door halfway. If it's properly balanced, it'll hold its position without your help. If the door begins to ride up or fall, you need to get an expert to adjust the spring's tension. 

Inspect the Rollers

Rollers are an important part of garage roller doors. Whether they're made of nylon or steel, they need to be inspected every few years, especially if you use the garage roller door many times in a day. If the rollers are chipped, warped, or cracked, they need to be replaced as soon as possible. 

Groom Your Garage Doors

Examining the door itself is a big part of maintenance. Check for water damage, rust, peeling or chipped paint and warping. Steel doors have rust spots that may require a garage roller door expert to sand them, prime them or paint them. 

Test Auto-Reverse Safety Features

Garage door sensors are vital in the working of a garage roller door. There are two types of garage door sensors; photocell or mechanical. To test the mechanical system, place a piece of brick or wood on the ground to block the path of the door. When the door touches the object, it should change direction and immediately reverse. To test the photoelectric system with beams on each side, close the door and pass your leg in its path. The door needs to reverse.

The first step of maintaining your garage roller door is looking and listening. If you notice that its movement is not smooth or it doesn't operate smoothly, call a garage door expert to inspect it. Look for someone who works with roller doors


Share